Radware Application Switch unleashes a vast increase in performance and processing power, allowing network managers and operators to cost effectively accelerate the intelligence, health and speed of both existing and new infrastructure. The Application Switch II can make comprehensive Layer 4-7 switching decisions based upon specific applications, destination requests or actual content passing through it - at Gigabit speeds.

Web Server Director
Cache Server Director
Fireproof
Linkproof
Peer Director

 


White Paper
513kb


Application Switch II Specs
218kb


 
Radware 
Application Switch II
Application Switching Physical Platform		  
Radware Application Switch II platform unleashes a vast increase in performance and processing power, allowing network managers and operators to cost effectively accelerate the intelligence, health and speed of both existing and new infrastructure. The Application Switch II can make comprehensive Layer 4-7 switching decisions based upon specific applications, destination requests or actual content passing through it - at Gigabit speeds.   Web Server Director
Cache Server Director
FireProof
LinkProof

Peer Director

Radware's Application Switch II is based on a multi-layered switching architecture and a non-blocking 19.2 Gigabit backplane, which provides ultra-high capacity for application switching. Switching ASICs on the port levels ensure unmatched session forwarding rates. The platform supports 5 Gigabit ports and 16 Fast Ethernet ports, all in 1U, providing the highest port density in the market.

Radware's award winning solutions are all available on the Application Switch II platform.

In keeping with Radware's overall integration philosophy, all Application Switch modules were designed to integrate seamlessly into existing networks through a variety of installation and configuration options. These options include, but are not limited to, a single leg connection (lollipop), dual leg connections or configurations that connect servers directly to the Application Switch.

Product Specifications for the Application Switch ll Platform

Hardware
CPU Microprocessor Motorola Power PC 7410, 500 MHz
ASCII Terminal Port 9-pin D-type female RS-232 connector,flat cable, DCE
Setup: 19200bps, 8 bits/character, one stop bit, no parity, flow control: none
Memory 8 MB FLASH, 128 MB DRAM, NVRAM 8KB

LAN Interfaces
16 RJ45 connectors for IEEE 802.3 10/100BaseT + 5 GBIC connectors for IEEE 802.3Z 1000BaseSX
-Or-
7 GBIC connectors for IEEE 802.3Z 1000BaseSX
The ports are auto-sensing, but can be forced to a specific speed via CLI management.
Fast Ethernet ports support half-duplex and full-duplex (default: auto-negotiation) communication on 10 and 100 Mbps.

Panel Indicators
Unit LEDS: ON (power on) and System OK.
Interface-specific LEDs: LNK (link up), FE (100 Mb for FE ports), Collision (collision indicator), Err (Error indicator), ACT (current traffic load), FD (Full Duplex for EF ports), Tx (Traffic Transmitted Indicator), Rx (Traffic Received Indicator)

Management
SNMP MIBs: RFC1213, RFC1253, RFC1286, RFC1354, RFC1389, RFC1493, RFC1525, RFC1573, RFC1850
Radware MIB compliant
Telnet: RFC854
HTTP: RFC2616

Power
100V-120V/200V-240V AC, auto-selection, 50-60Hz
Total power input: up to 50W
Voltage: 3.3V
Physical
Height: 43.6mm
Width: 430mm
Depth: 465mm
Weight: 4.1kg
Mounting: Table top or 19" rack mounting

Environment
Temperature: 0° - 40° C / 32° - 104° F
Humidity: 5% to 95% non condensing

For more information, you can download brochures in Adobe Acrobat format:


White Paper
513kb


Application Switch II Specs
218kb

You will need the Acrobat Reader to view these files. You can download it for free from Adobe.